What We Actually Do
We work on garage doors and openers at houses across Fort Worth, from homes built in the early 1990s boom years out past Saginaw and Lake Worth to the older stock closer to North Side and Diamond Hill, where houses can date back to the 1950s. Most of the housing in our service area went up between 1953 and 2010, with the bulk from the 1980s and 90s, so we see a wide spread of track styles, spring setups, and opener brands in a single week.
We repair broken springs, cables, rollers, and tracks, replace worn openers, and swap out doors that have taken enough damage or rusted enough that patching them isn't worth your money anymore. We also handle new door installs when a homeowner wants a change instead of a repeat repair. We do this work at single-family houses, not commercial roll-up doors or gate systems.
What we can quote over the phone is limited. A torsion spring size depends on the door's weight and the drum on your specific shaft, and we won't guess at that number without seeing it. What we can tell you up front is whether a job is a simple part swap or a full door replacement, based on age, symptoms, and a couple of photos you send us.
Getting Hold of Us
Call 1-682-345-3475 and tell us what's going on with your door: won't open, made a loud bang, sags on one side, opener runs but door doesn't move. Those details help us bring the right springs and cables the first time instead of a truck roll to figure out what part we forgot.
We're based at 5749 Parker Henderson Rd, Fort Worth, TX 76119, and that's also where the truck is loaded from before it heads out. If you're near River Oaks, Sansom Park, Westover Hills, or Haltom City, that's a short run for us. Farther out toward Aledo, Roanoke, or Newark, we can still get there, it just means telling us on the call so we can plan the route.
A quote by phone is a range, not a number you can hold us to. The number that matters is the one we give you standing in front of the door, after we've opened the panel covers and checked the spring winding, the track alignment, and whether the opener's logic board is actually the problem or just the symptom.
Who You Are Dealing With
Fort Worth Garage Door Co is one company working one service area - Fort Worth and the towns around it, not a national call center routing your job to whoever's closest. We don't have a long company history to hand you, and we're not going to invent one. What we can tell you is what we work on and how we price it.
Our service area runs from the close-in neighborhoods - North Side, Diamond Hill, the Cultural District, Near East Side - out to towns eight to eighteen miles off, like Lakeside, Edgecliff Village, Kennedale, Keller, and Willow Park. Median household income across this area sits around $98,003, and most of the housing was built between 1953 and 2010. That mix matters because a door that's original to a 1990s build often needs different hardware than one installed after a later replacement.
Summers here run hot enough that we count Fort Worth in the severe heat band for garage door wear - heat cycles doors, seals, and openers harder than mild climates do, and that shows up in the parts we replace most.
What We Will Not Do
We won't give you a firm price over the phone for a spring replacement, a bent track, or anything that needs eyes on the actual hardware - too many doors look the same from the driveway and aren't the same once the panel's off. We won't quote a job sight unseen and then pad the invoice once we're there; if the number changes, we tell you why before we do the work, not after.
We don't work on commercial overhead doors, security gates, or fence automation - just residential garage doors and openers. And we won't sell you a full door replacement when a spring and a set of rollers will get you another several years out of the one you have. If the door's frame is sound and the damage is limited to parts we stock, repair is the honest answer, even though it's the smaller invoice.
We also won't promise a specific arrival window on this page, because we don't have a stated response time to quote you - ask when you call and we'll tell you what the day looks like.
Frequently asked questions
What information do you need to give me an accurate quote?
Tell us the symptom (won't open, off track, loud bang, opener runs but door doesn't move), the rough age of the door if you know it, and whether it's a single or double door. Photos of the spring and track area help a lot. The firm number comes once we're standing in front of it, but this gets us close.
Can you tell me the price of a new torsion spring over the phone?
Not accurately. Spring size depends on the door's weight, the drum diameter, and the wind direction on your shaft, all of which we check in person. We can give you a general range on the call, but the number we quote at your door is the one that holds.
Do you work outside Fort Worth city limits?
Yes. We cover towns from a few miles out, like River Oaks and Sansom Park, to farther towns such as Aledo, Roanoke, and Newark, roughly 16 to 18 miles from Fort Worth. Tell us your location on the call and we'll confirm the trip.
What won't you work on?
We stick to residential garage doors and openers. We don't service commercial roll-up doors, security gates, or fence automation systems. If that's what you need, we'll tell you so upfront instead of taking the job.